INFO

• EPO180H multi-surfacer
• Versatile power tool with various head options
• Powerful motor & variable speed control
• Balanced H frame with reduced vibration
• Multiple wall & floor applications
• Easily change between heads
• Locknut, backing pad and M14 fittings
• Dust hoods available for all heads
• Can be fitted with a range of discs & heads

The EPO180 multi-surfacer is available with an array of different discs and heads for multiple trade applications. It is supplied as a stand alone machine. The heads are either attached using a locknut, backing pad or direct M14 fitting. Simply pick the disc heads and corresponding fixtures and accessories to build the multi-surfacer that you require. Additional interchangeable heads can be purchase separately

180mm		Coating remover with ZEC hard backed disc. For use on brick, concrete, masonry coatings, plaster, render & floor coatings
180mm		Paint stripper with ATX hard backed disc. For use on hard surfaces to remove paint or remove rust from steel
180mm		Masonry & concrete sander with silicone carbide semi-flexible disc & backing pad. For use on brick, concrete, masonry coatings, stone, plaster, render & floor coating
180mm		Sander-edger with multi-hole disc & backing pad. For use on plaster, render & wooden floors
180mm		Sander-edger with multi-mesh disc & backing pad. For use on composites, grp, masonry coatings & stone
180mm		Sander-edger with silicone carbide disc & backing pad. For use on concrete, plaster, floor coatings & screed
125mm		Concrete sander with diamond dot metal pad & backing pad. For use on bricks, concrete, floor coatings & screed
100mm		Bush hammer with tungsten tipped rollers. For keying back concrete, coatings & render
150mm		Scabbler with hardened steel C2 cutters. For removing paints & coatings from steel
150mm		Scabbler with solid tungsten C4 claw cutters. For scabbling concrete & render, keying back hard surfaces
150mm		Scabbler with solid tungsten C5 star cutters. For scabbling concrete & render, keying back hard surfaces
150mm		Scabbler with tungsten tipped C6 cutters. For leaving a rough surface on masonry & brick

PLEASE SEE RELATED PRODUCTS BELOW FOR ALL DISCS SUITABLE FOR USE WITH THIS MACHINE

SPECIFICATIONS

• Power 1500w
• Variable speed 1300-4000rpm
• Weight 3.8kg
• Prep rate up to 30m/hr
• Vibration level 2.5m/s
• Noise level 79dBA
• Voltage 110v or 230v

APPLICATIONS

• ZEC disc for caoting removal
• ATX disc for stripping paint & coatings
• Semi-flexible disc for cleaning flat brick, stone & concrete
• Yellow multi-hole disc for sanding floor coatings & grp
• Multi-mesh disc for sanding laminate floors
• Silicone carbide disc for finishing concrete & stone
• Diamond dot disc for grinding concrete, stone & epoxies
• Bush hammer for abrading stone, tiles & concrete
• C2 scabbler for removing paints & coating from steel
• C4 scabbler for keying back hard surfaces
• C5 scabbler for keying back hard surfaces
• C6 scabbler for leaving a rough surface on masonry & brick